This unit is mounted on the loader. It has two very powerful magnets bolted to the bottom of the enclosure which ensures an instant attachment to any steel surface. Nautilus recommends that it is attached to the underside of the ROPS canopy because it is well protected there and no welding or drilling of the canopy is allowed. It can also be bolted in place if required.

The Video-Tx accepts input video from the three cameras on the loader via the green, yellow and red cables, the fourth blue cable feeds in power (24V/Gnd) plus the camera selection wires. The last cable is the SMA connector which sends the wireless video output to the Video-Antenna (CPVA-Tx).