The operator will have fingertip control of the three cameras installed on the loader. The two cameras at the front are used when the loader is tramming forward. The third camera is used for tramming in the reverse direction.

The “front-side” camera is deliberately offset to one side so the camera view is not obscured as the boom is raised and lowered. Lenses with a 90° viewing angle are used for all three cameras to ensure the operator receives the best possible view when remotely operating the vehicle.

Underwater connectors with gold plated pins ensure that corrosion is not a problem and the unit is completely water resistant. The cameras have excellent resolution and function very well in poor lighting conditions. Nautilus uses only the finest CCD colour cameras which meet IP68 standards (submersible) and produce excellent pictures.

The base of the camera is a powerful magnet which means the camera can be instantly attached to almost any part of the loader.

The mounting bracket is made from stainless steel for maximum strength to ensure no problem with corrosion.

The small size of these tiny cameras makes them so easy to pack and ship.  Our previous Powercam System used to require two large wooden crates to contain a single complete system.  Now one reasonably sized reinforced cardboard box can easily contain all of the Powercam equipment.
 

● Dimensions:  Camera: 47mm x 47mm x 40mm (1.85" x 1.85" x 1.57"); Magnetic base: 52mm diameter x 8mm thick (2" diameter x 0.32" thick)

● Image device: Hi Resolution 1/3" Sony EXview CCD

● Effective pixels: NTSC: 768(H)x494(V); PAL: 752(H)x582(V)

● Scanning system: NTSC: 525 lines; 60fps, PAL: 625 lines; 50fps

● Resolution: NTSC: 480TVL; PAL: 520TVL

● Viewing angle: 53°

● Illumination Sensitivity @F:2.0: D:0.5Lx; N:/0.05Lx)

● Power supply: DC12V 130mA

● Operating temperature: -10°C~+50°C

KEY BENEFITS:

- Rugged
- Operates on 12V
- Water-Resistant
- Excellent colour picture